The next step is to take your new WeldProUSA Electronic Weld Cleaner Magic Wand and place it near the unit. From here, we are going to show you the proper procedure to prepare the Magic Wand for cleaning.	Get your roll of Weld Cloth and your scissors. Get a strip of about 14"-16" and cut it. The Weld Cloth acts as an insulator to the wand. Without the Weld Cloth use of the Magic Wand would be impossible. Follow closely.
From this point forward you need to use gloves to protect  your hands from heat(from the metal being cleaned and  the Magic Wand itself.) The Weld Solution contains  phosphoric acid and is known to be corrosive.	Using rubberlatex gloves will protect your skin from exposure to it during cleaning. Next put on the work gloves over the latex gloves to prevent your hands from getting burned. The metal being cleaned and the Magic Wand get very hot.

     | Steps 1-4 | Steps 5-8 | Steps 9-12 | Steps 13-16 | Steps 17-20 | Steps 20-24 |   

| Weld Cleaner Kit | Seeing is Believing | Show Me How it Works | Specifications & Features |

| Home | Company Info | Products | Video | Order A Machine |

Copyright © 1998-2008 WeldProUSA. All Rights Reserved. All pictures are © 1998-2008 WeldProUSA. All Rights Reserved Unauthorized copying or distributing without prior written consent is strictly prohibited by law.