At this point you are ready to connect the ground clamp to the Electronic Weld Cleaner. Simply take the spade of the end of the ground clamp and attach it to the black banana jack.	Take the Weld Solution plastic bowl and fill it about one half full with the Weld Solution. Remember this solution is corrosive. Follow all directions on the Weld Solution Label. Do not get this mixed up with the water bowl.
Get the water bowl ready by filling it with water. You will want to place this and the rinse rags near the metal being cleaned. As soon as you're done cleaning about 36" of weld stains, immediately wipe down the metal with water.	Now you are ready to turn the unit on and start cleaning weld stains. Place the unit near the metal being cleaned so you can easily turn it on and off. The 10' Magic Wand and ground clamp cords provide easy manuverability.

 | Steps 1-4 | Steps 5-8 | Steps 9-12 | Steps 13-16 | Steps 17-20 | Steps 20-24 |   

| Weld Cleaner Kit | Seeing is Believing | Show Me How it Works | Specifications & Features |

| Home | Company Info | Products | Video | Order A Machine |

Copyright © 1998-2008 WeldProUSA. All Rights Reserved. All pictures are © 1998-2008 WeldProUSA. All Rights Reserved Unauthorized copying or distributing without prior written consent is strictly prohibited by law.